600A T Connector, T-II Connector
Product Brief
Product Model: YJSTP-_kV 600A (T connector)
YJSTP-II_kV 600A (T-II connector)
Applicable Voltages Class: 8.7/10kV, 12/24kV, 18/30kV
Product Features
1. It is made of high-quality insulation material, which is full-insulation, full-sealing and full-shielding product. It adopts three-layer composite structure with higher electrical performance indices, and safe and reliable application.
2. After fitting T connector with rear T connector, the distance between their centers is only 132mm; after fitting the T-II connector with elbow plug, it’s 30mm shorter than the traditional structure; it not only fully satisfies the installation space requirement of ring main unit, but also further reduce the structure and size of cable branch box. It has an even outer shielding layer of 2mm thick, and the grounding resistance is smaller than 1000Ω, which is the most advanced T connector in the world.
3. The T cable connector applies to the American-style box transformer substation, ring main unit and cable branch box. As the connection between cable inlet/outlet and cable, it can connect to 600A high-voltage bushing, multi-connected socket, 600A bus bushing and rear T connector to form multi-line cable branches. The cable testing point can be installed with charged displayer or cable fault indicator. It mainly applies to cable cross-section of 35-500mm².
4. The T-II connector applies to the main system of cable branch box, or it can be used as the inlet/outlet cable connector of ring main unit. It applies to cable cross-section of 25-500mm² and rated current of 600A. The T-II connector has 600A/ 200A conversion interface, it can be connected with 200A elbow plug or elbow arrester, and it is the combination of T connecter and adapter.